Description:
Remove dents with confidence using our auto paintless dent repair kit–a practical and cost-effective solution for vehicle bodywork. Designed with both beginners and experienced users in mind, this kit makes restoring the original look of your car easier than ever. Lightweight glue gun fits comfortably in hand, allowing precise application of adhesive. The included slide hammer delivers strong pulling force with minimal effort, while the selection of glue tabs and sticks ensures compatibility with dents of all sizes. Whether you are tackling a small dent or a more complex repair, this all-in-one kit gives you the tools you need to get the job done cleanly, efficiently, and without damaging the paint of your vehicle.
Features:
• [All-in-One Kit]: Comes with a hot glue gun, glue sticks, slide hammer, scraper, and a wide range of pull tabs for all dent sizes.
• [Durable Construction]: Built from robust and selected materials to endure frequent use without losing effectiveness.
• [Strong Slide Hammer]: The 1kg slide hammer provides powerful pulling force, helping remove dents with less physical effort.
• [Multi-Use Design]: Suitable for cars, bikes, trucks, and even household appliances like fridges and washing machines.
Specifications:
Dimensions
Slide Hammer: 11.6cm(W) x 48.5cm(H)
Glue Gun: 19cm(W) x 16cm(H)
Product Type: Paintless Dent Repair Kit
Material: Metal + Plastic
Hammer Colour: Silver
Glue Gun Colour: Blue
Voltage: 100-240V
Power Source: Plug-in
Plug Included: Yes
Package Content:
1 x Slider Hammer
1 x Hot Glue Gun
1 x Yellow Glue Removal Scraper
5 x Yellow Glue Sticks
5 x Black Glue Sticks
28 x Blue Pull Tabs
1 x Spray Bottle
1 x Towel
1 x Instruction Manual
Package Specifications:
Package Dimensions(W x D x H): 40cm x 20cm x 9cm
Gross Weight: 2.2kg
Steps for Using:
- Thoroughly clean the dented area with a clean cloth or cleaner to remove any dust, grease, or contaminants.
- Select an appropriate blue puller tab and apply hot melt glue to the designated area on the tab.
- Position the puller tab onto the dent, ensuring it adheres securely, and then allow it to set for a few minutes.
- Securely connect the hook or clamp of the slide hammer to the pull tab, ensuring it is tightly fastened to avoid slipping during use.
- Hold the handle firmly and pull the sliding rod backward to create an impact force that pulls the dent outward. Repeat as needed until the panel is restored to its original shape.
- To remove the glue, use alcohol or detergent along with a plastic scraper. Afterwards, clean the repaired area with a damp and clean cloth.
Notes:
- Despite efforts for accuracy, there may be some reasonable error due to manual measurement.
- Actual product colours may vary due to monitor settings & lightings.